Masimo Packaging Labeling

On September 3, 2020, Italy passed Legislative decree No. 116, which states that “All packaging shall be appropriately labelled in accordance with the procedures laid down in the applicable UNI technical standards and in compliance with the decisions of the European Commission, in order to facilitate the collection, reuse, recovery and recycling of packaging, and to provide consumers with proper information on the final destination of packaging. Producers are also required to indicate the nature of the packaging materials used, on the basis of Commission Decision 97/129/EC.”

Due to the variety of types and sizes of its packaging, Masimo took a digital approach to fulfill its obligation, under the degree, to communicate the environmental labeling of its packaging. 

You will find a comprehensive list of packaging material below.

All Masimo products sold in Italy need to comply with the new packaging regulation.

The packaging regulation has two different scenarios regarding the minimum label requirements, based on the packaging destination: B2B (professional) or B2C (consumer).

For B2C packaging, the following information is required:

  • The packaging material’s identification code under Decision 129/97/EC
  • Collection Guidelines

For B2B packaging, the following information is required:

  • The packaging material’s identification code under Decision 129/97/EC

All further information provided by Masimo is voluntary.

  • No, due to limited space, a label with a QR code will be used instead. Scanning the code will direct you to this page.
  • A comprehensive list of packaging material can be found at the bottom of this page.

Below are examples of:

  • Shipping box (tertiary packaging) with QR code
  • Outer product box (secondary packaging) with QR code
  • Internal product packaging (primary packaging) with QR code
  • If you can’t identify your packaging material from the list below or have other packaging questions not answered by the FAQs, please contact Material Compliance:
    Material Compliance: [email protected]

France: Unique identification Number (UIN)

Per Article R541-173 of the French law AGEC, a producer is to communicate their French unique ID number to comply with the Extended Producer Responsibility (ERP) requirement.

Masimo emballage (UIN): Identifiant unique ADEME FR277023_01IRPZ pour la REP Emballages chez CITEO

Masimo packaging (UIN): ADEME unique ID FR277023_01IRPZ – Masimo is registered with CITEO for packaging material.

B2C Packaging

B2C Packaging

 

MightySat®

Product Box

  • Non-corrugated box with magnet
  • C/ PAP 81
  • Paper collection
  • Check your local municipal guidelines

Box inserts
(Instrument + Accessories)

  • Non-corrugated box insert
  • PAP 21
  • Paper collection
  • Check your local municipal guidelines

Bag

  • Polyethylene bag
  • LPDE 4
  • Plastic collection
  • Check your local municipal guidelines

Hang Tab

  • Box hang tab
  • PET 1
  • Plastic collection
  • Check your local municipal guidelines

Masimo SafetyNet Alert™

Product Box + Internal box + Inserts

  • Non-corrugated box
  • PAP 21
  • Paper collection
  • Check your local municipal guidelines

Bag

  • Polyethylene bag
  • LPDE 4
  • Plastic collection
  • Check your local municipal guidelines

Foam Pouch

  • Anti-static polyethylene foam pouch
  • LDPE 4
  • Plastic collection
  • Check your local municipal guidelines

Masimo Sleep

Outer Mailer Box

  • Corrugated cardboard box
  • PAP 20
  • Paper collection
  • Check your local municipal guidelines

Inner Product Box

  • Non-corrugated box
  • PAP 21
  • Paper collection
  • Check your local municipal guidelines

Box Sleeve

  • Box paper insert
  • PAP 22
  • Paper collection
  • Check your local municipal guidelines

Box Insert (Instrument + Accessories)

  • Corrugated box insert
  • PAP 20
  • Paper collection
  • Check your local municipal guidelines

Bag

  • Polyethylene bag
  • LPDE 4
  • Plastic collection
  • Check your local municipal guidelines

Radius Tº

Outer Mailer Box

  • Corrugated cardboard box
  • PAP 20
  • Paper collection
  • Check your local municipal guidelines

Inner Product Box

  • Non-corrugated box
  • PAP 21
  • Paper collection
  • Check your local municipal guidelines

Box Sleeve

  • Box paper Insert
  • PAP 22
  • Paper collection
  • Check your local municipal guidelines

Box Insert (Instrument + Accessories)

  • Corrugated box insert
  • PAP 20
  • Paper collection
  • Check your local municipal guidelines

B2B Packaging

B2B Packaging

 

Air Pillow

  • Polyethylene air pillow
  • LDPE 4
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • Accessories
  • Cables
  • Instruments
  • Sensors

Bag

  • Clear polyethylene bag
  • LDPE 4
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • Accessories
  • Cables
  • Instruments
  • Sensors

Battery Seal Tab

  • Plastic battery tab
  • Plastic Collection
  • <HDPE + PET> 7
  • Check your local municipal guidelines

Where Used

  • Radius PPG®

Box Insert (Air fill)

  • Instrument air-filled box insert
  • <LDPE + Nylon> 7
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • Root® device

Box Insert

  • Corrugated box insert
  • PAP 20
  • Paper collection
  • Check your local municipal guidelines

Where Used

  • NomoLine®

Box Insert

  • Corrugated box insert
  • PAP 20
  • Paper collection
  • Check your local municipal guidelines

Where Used

  • GE Carescape SpO2

 Box (Product)

  • Corrugated cardboard box
  • PAP 20
  • Paper collection
  • Check your local municipal guidelines

Where Used

  • Instruments

Box (Product)

  • Non-corrugated cardboard box
  • PAP 21
  • Paper collection
  • Check your local municipal guidelines

Where Used

  • Accessories
  • Cables
  • Sensors

Box Handle

  • Elliptical polyethylene handle
  • LDPE 4
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • Home Health Kit

Box Handle Support Plate

  • Polypropylene handle support plate
  • PP 5
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • Home Health Kit

Box (Shipping)

  • Corrugated cardboard box
  • PAP 20
  • Paper collection
  • Check your local municipal guidelines

Where Used

  • Accessories
  • Cables
  • Instruments
  • Sensors

Bubble Bag

  • Anti-static polyethylene bubble bag
  • LDPE 4
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • TNI applicators
  • Mounting accessories

Card Insert

  • Plastic collection
  • Polypropylene card insert
  • PP 5
  • Check your local municipal guidelines

Where Used

  • VSM™ ECG Sensor

Foam Insert 

  • Polyurethane foam insert
  • PU 7
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • SedLine® modules
  • ECG modules
  • IRMA CO2
  • rainbow SET Pulse Cables

Foam Pad Insert

  • Polyurethane foam insert
  • PU 7
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • GE Carescape SpO2

Foam Pouch 

  • Polyethylene foam
  • LDPE 4
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • DCI-Mini® sensor

Foam Pouch 

  • Anti-static polyethylene foam
  • LDPE 4
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • Instruments

Pouch

  • Label side: HDPE 2
  • Clear side: LDPE 4
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • LNCS® sensors
  • RD SET® sensors
  • Radius PPG sensors

Pouch

  • Label side: C/LDPE 86
  • Clear side: C/LDPE 86
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • ECG sensors
  • SedLine® sensors

Sensor Release Liner

  • HDPE clear release liner
  • HDPE 2
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • All sensors

Tray Insert

  • Clear RPET tray insert
  • PET 1
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • Rad-G®
  • iSpO2®

Tray Insert

  • SedLine sensor tray
  • PS 6
  • Plastic collection
  • Check your local municipal guidelines

Where Used

  • SedLine sensors

PLCO-005632/PLMM-12183A-0123