OEM Solutions

Masimo's breakthrough noninvasive monitoring technologies can be easily integrated into a wide range of multiparameter and multi-use monitoring devices with our family of MX and MS 2000 series circuit boards.

MX boards—when used with Masimo rainbow® multiple wavelength (7+) LED sensors—are capable of providing the full suite of Masimo rainbow SET® measurements, including Total Hemoglobin (SpHb®), Oxygen Content (SpOC), Carboxyhemoglobin (SpCO®), Methemoglobin (SpMet®) and Pleth Variability Index (PVI®) in addition to the Masimo SET measure-through motion and low perfusion pulse oximetry measurements of SpO2, pulse rate and perfusion index.

MS 2000 series boards—when used with any one of a broad array of Masimo SET compatible sensors—provide Masimo SET measure-through motion and low perfusion pulse oximetry measurements of SpO2, pulse rate and perfusion index in addition to PVI.

The new MS-2040 board utilizes about a third of the power and is only half the physical board size of previously available Signal Extraction Pulse Oximetry solutions while providing the same proven unprecedented Measure-through Motion and Low Perfusion capabilities. The MS-2040 board is also available as an external “board-in-cable” solution embedded within a completely self-contained patient cable that provides external Masimo SET pulse oximetry capabilities for existing devices that do not presently offer an integrated pulse oximetry solution.

MS-2040 Masimo SET OEM Board
First Sub-45 mW Signal Extraction Pulse Oximetry Platform

Dimensions and specifications on the MS-2040 board are as follows:

Double-stack version

Masimo Double Stack

Single-stack version

Masimo Single Stack

Single-stack version (MS-2040)

  • Size = 2 inches by 1.38 inches
  • Board thickness = 0.36 inches
  • Mounting hole diameter = 0.125 inches

Double-stack version (MS-2040ds)

  • Size = 1.8 inches by 1.15 inches
  • Board thickness = 0.46 inches
  • Mounting hole diameter = 0.110 inches

MX-3 Masimo rainbow SET OEM Board

Masimo MX-3 board

Dimensions and specifications on the MX-3 board are as follows:

  • Size = 2 inches by 2.5 inches
  • Board thickness = 0.062 inches
  • Mounting hole diameter = 0.125 inches

MS-2013 Masimo SET OEM Board

Masimo MS-2013 board

Dimensions and specifications on the MS-2013 board are as follows:

  • Size = 2 inches by 2.5 inches
  • Board thickness = 0.062 inches
  • Mounting hole diameter = 0.125 inches

MS-2011 Masimo SET OEM Board

Masimo MS-2011 board

Dimensions and specifications on the MS-2011 board are as follows:

  • Size = 2 inches by 3.5 inches
  • Board thickness = 0.062 inches
  • Mounting hole diameter = 0.125 inches